• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 63 subscribers
  • Views 762 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/TPS63070: Cannot see the exported design from Webench to Downloads in my computer

Marvin Tolentino
Prodigy 100 points
Part Number: TPS63070

Tool/software: WEBENCH® Design Tools

Hello,

I selected a reference design for TPS63070 and tried to simulate in the Webench. When I finished, I chose Eagle as this is my schematic editor and clicked on Export. However, I cannot see the file in the Downloads of my computer. How do I go about this? 

Link: webench.ti.com/.../4

Regards,

Vino

  • 0
    TI__Expert 7925 points
    Hello Vino,

    Thank you for pointing that out, I will check it and get back to you by Monday. The TPS63070 BXL file was recently changed, specifically due to export issues with Eagle.

    Best regards,
    Milos
  • 0
    TI__Expert 7925 points
    Hello Vino,

    I just tried exporting one design based on TPS63070 and did not see any problems. When you click the export button in Webench, and chose Eagle schematic, the download file will be generated. Then click download, save the compressed zip file, unpack it and load the schematic in Eagle.

    Best regards,
    Milos
  • 0 in reply to Milos
    Prodigy 100 points

    Hello Milos,

    I tried downloading by now and it did work. There was a window popped up for me to save the file and I was able to open the schematic in Eagle. I just did the same steps before but I believe it was just an error on my end. Thank you so much!

    Regards,

    Vino