BQ24610: BQ24610RGET

Hi Sriramdhivakar,

What is your input voltage (24V?) and battery voltage? Is /PG low, VREF=3.3v and REGN=6.0V?

Hi jeff

            Input voltage     =  24v DC (From Adaptor 24v,3A).

            Battery Voltage = 7.4V(Nominal) to 8.4V(Full charge).

            Vref                     = 3.3v

            REGN                 = 6.0V

            PG                       =  LOW

current battery voltage is 7.9V.

But still STAT1 led(D6) indication  is Blinking

What do you mean "Battery is not charging properly"? Could you please provide more details? Thanks!

Hi Ning
when i connect the Battery(7.4V) STAT1 LED want to want to ON as per the Datasheet .
In our design STAT1 LED is blinking .

Input power supply = DC 24V,3A

Battery Voltage = 7.4V(Nominal) to 8.4V(Full charge).

Vref = 3.3v

REGN = 6.0V

PG = LOW

Then we need how to increase the charging current for battery.

Could you please look at the REGN pin waveform on the scope and check if the voltage is constant? Thanks!