TPS7A4501-SP: TPS7A4501-SP: looking for single event effects report, SLAK014

Yes, please.  Preliminary report most likely be good for the purposes I need it for.

Would I be able to provide the report to my customer for part approval purposes?

Thanks

This report is for the -02 device (SMD 12224), whereas our part is the -03 device. There’s some difference in the electrical characteristics, with the -02 device having a load current of 750 mA, and the -03 device load current of 1.5A. There’s also some differences in the Group A electrical specifications. The devices probably have the same internal die, but we need to better understand the differences between the -02 and the -03 devices, to make sure we can make a “similarity” argument in the event that we don’t obtain data for the -03 device. Can you help with that?

Hey Stephen,

Even though the report is for the -02 device this report applies to both.

Thanks,

Daniel

Hello Daniel,

Could I also get a copy of the preliminary Single Event Effects report?

Thank you,
Joshua