• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5170EVM-BIDIR: 2 Channels Set to Boost & Run in Parallel?

Go Bravos
Expert 6090 points
Part Number: LM5170EVM-BIDIR

Hi team,

On the LM5170EVM-BIDIR, can the 2 channels be set to boost and run in parallel?

Thank you.

  • 0
    TI__Guru* 78520 points
    Hi Go Bravos,

    Yes, they can. If you boost output is not prebiased, you need to remove the circuit breaker FETs and solder the two exposed pads on the back side. Also remember to close the two pins of header J3 (SYNC_R).

    Thanks,
    Youhao Xi