Other Parts Discussed in Thread: BQ27510
Any recommendations on a fuel gauge to use with a 1S1P or 1S2P lithium ion battery pack? We will be using BQ25895 as the charger.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Each cell could be 2600-3340mAh. Max discharge could be 2.5-3 amps. We would either use just one or two in parallel. The manufacturer will have protection circuitry in the pack, but there is no fuel gauge so we need something on our PCB in the host device. The device is a portable handheld.