• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 158 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Which power cable to choose

Sumaiya Shomaji
Prodigy 100 points

Hi,

I want to order a power supply for "DLP® NIRscan™ Evaluation Module" machine. Can you please kindly send me the link of the power cable required for the machine?

Regards,

Sumaiya Shomaji

  • 0
    TI__Prodigy 340 points
    Hi Sumaiya,

    Thanks for using the forum for your question...

    The user guide for any system under review will contain the information you are looking for. Basically a 12V input voltage supply capable to handle 5A max will work for the DLP NIRScan EVM.

    User Guide Link is below as reference:
    www.ti.com/.../dlpu016b.pdf

    Please let me know how can I further assist with your request.