On the datasheet, the MR pin is described as a Manual Reset input and is a push-button input.
Does the MR require a physical switch for it to operate correctly?
If not, can this pin be left floated or be controlled by GPIO?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
On the datasheet, the MR pin is described as a Manual Reset input and is a push-button input.
Does the MR require a physical switch for it to operate correctly?
If not, can this pin be left floated or be controlled by GPIO?