BQ78350: FW configuration

Danil Koshelev

Part Number: BQ78350
Other Parts Discussed in Thread: BQ76920, BQSTUDIO, EV2400,

Dear TEXAS, I have a EVM board "bq76920 Evaluation Module" and ID of BQ78350 - 1E9b_0_00 but there is not the same config file in BQStudio. Please send me actual config file or FW for BQ78350.

Thank you!
Best regards, Danil

over 6 years ago

0 WM5295 over 6 years ago

TI__Guru 54715 points

Hi Danil,

The device on the board has old firmware which is no longer supported, please update to the current firmware. See the bq76920EVM user guide section 5.5. The EV2400 can be used if its firmware is updated to the one on the website. The EV2300 will also work if you have one.

bq78350-R1 Firmware can be obtained from the product folder Tools & software tab, see bq78350-R1 Device Firmware There is an updated firmware also available there, you may want to see the revision notes to consider changes, BQ78350-R2 Device Firmware: CEDV Li-Ion Gas Gauge and Battery Management Controller

Power management

Power management forum

BQ78350: FW configuration