LDO: input 3.3V, output 1.0V and 2.5V, current needs 150mA, small package like SOT-23

Eric zhu

Other Parts Discussed in Thread: TPS7A05

Dears,

Can you recommended me two LDO or a adjustable LDO, input 3.3V, output 1.0V and 2.5V, current needs 150mA, small package like SOT-23

Thank you.

Best regards

over 6 years ago

0 Ryan Eslinger over 6 years ago

TI__Guru 55940 points

Hi Eric,

As you may imagine we have several LDOs that fit your stated application requirements such as TPS7A05. Additional options can be found using our parametric search. I have inputted your stated requirements into the parametric search here:

http://www.ti.com/power-management/linear-regulators-ldo/products.html#p451max=0.15;7.5&p238max=3.3;125&p238min=-40;3.3&p634max=2.5;125&p634min=-37;1&p2954=SOT-23;SOT-23-THIN&p1498=Catalog

Very Respectfully,

Ryan

0 Ryan Eslinger over 6 years ago in reply to Ryan Eslinger

TI__Guru 55940 points

Hi Eric,

Since it has been several weeks without a reply, I assume that this thread is resolved. If this is not correct, please feel free to post again.

Very Respectfully,
Ryan

Power management

Power management forum

LDO: input 3.3V, output 1.0V and 2.5V, current needs 150mA, small package like SOT-23