BQSTUDIO: Where can I get *.bqz configuration file for BQ25708 ?

Anatoly Dobreen

Part Number: BQSTUDIO
Other Parts Discussed in Thread: BQ25708, , BQ25700A

I trying to use Battery Management Studio for testing device with BQ25708 charger.

At section Tools & software for this charger I see link for BQSTUDIO (http://www.ti.com/product/BQ25708/toolssoftware)

But in latest version BQSTUDIO (1.3.54.1) BQ25708 missed in chargers list.
Where can I get *.bqz configuration file for BQ25708 ?

Thanks.

Regards,

Anatoly

over 6 years ago

0 Jeff F over 6 years ago

TI__Guru**** 152336 points

Hi Anatoly,

The BQ25708 support team is out for the US Holiday until Monday the 26th. I apologize for the inconvenience.

0 Steve Preissig over 5 years ago in reply to Jeff F

TI__Expert 5330 points

Hello Anatoly,

The BQ25708 file has not yet been released with the latest available tool. Until it is released, please use the BQ25700A.bqz file. Both the BQ25700A and the BQ25708 have SMBUS slave address 0x12, and the register sets are identical except that all OTG-related fields on the BQ25700A are reserved on the BQ25708 as this feature is not available on BQ25708. These are:
register 0x12, bit 11 (OTG_ON_CHRGOK)
register 0x32, bit 12 (EN_OTG)
register 0x3B (OTG Voltage Register)
register 0x3C (OTG Current Register)

Regards,
Steve

0 Anatoly Dobreen over 5 years ago in reply to Steve Preissig

Prodigy 110 points

Hi.

Ok. Thanks a lot.

Kind regards,

Anatoly

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

BQSTUDIO: Where can I get *.bqz configuration file for BQ25708 ?