Detect the power detection of electrical switches and send to Wireless Analog and digital converter

Robson Jhon

I am looking for the IC packages which will help me to test the power status of around 32 electrical switches with some threshold setup and will send the signal one by one to wireless analog to digital converter.

Any circuit sample for testing or IC package to make this solution work with Single wireless converter will be a great help.

over 6 years ago

0 Jeffery Pfarr over 6 years ago

TI__Genius 14317 points

Hi Robson,

Are you trying to detect open/closed position of the switches and are the switches AC power switches? If there is a wireless interface between the switch sensors and the ADCs, what is the distance and is it wi-fi, Bluetooth, 2.4 Mhz or other? Please provide more details or a block diagram.

0 Jeffery Pfarr over 6 years ago in reply to Jeffery Pfarr

TI__Genius 14317 points

Hi Robson,

Its been a few days and I haven't heard back from you on my request for more information so I'm going to close this thread. If you do reply, the thread will reopen and we can continue the discussion.

Power management

Power management forum

Detect the power detection of electrical switches and send to Wireless Analog and digital converter