• State Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 338 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC28064A: for 2-ph Interleaved flyback

ACGUY
Guru 11170 points
Part Number: UCC28064A

Hello E2E,

Our customer will design 2-ph Interleaved flyback. We do like to suggest the UCC28064A to them.
Does TI concerned about it?

Pout is 250-W, 2-transformers, and 4-outputs.

Regards,
ACGUY

  • 0
    TI__Guru 74115 points
    I do not see any concerns unless you are worrying about something and if in that case, you have to advise for us to judge.
  • 0 in reply to Hong Huang
    TI__Guru 74115 points
    Please provide further details you are concerned. I do not see concerns to use UCC28064A in this case. I will close this thread. Please open a new thread if you have further details.
  • 0 in reply to Hong Huang
    TI__Guru 74115 points
    Your original question as below is answered clearly. If you have additional questions, you should open a new thread and ask your additional questions and state what problems you have are not resolved.

    Simply click rejection does not help to resolve your problems.

    "Our customer will design 2-ph Interleaved flyback. We do like to suggest the UCC28064A to them.
    Does TI concerned about it? "
  • 0 in reply to Hong Huang
    Guru 11170 points
    My intention is to ask TI's opinion on building a 2-ph flyback circuit using UCC 28064A.

    Few weeks ago, Our coworkers went to Dallas. TI marketer and designer says, "We will spare no cooperation". Now I learned that E2E and Dallas are not the same.

    I close this thread.

    Thanks,
    ACGUY (Macnica employee)
  • 0 in reply to ACGUY
    TI__Guru 74115 points
    Thanks for close this case! But I am still not exactly clear what you want to have. I replied ok to use UCC28064A for a 2-ph flyback. Are you asking TI to help create a reference design? If so, such a reference design can be done, and you can ask your local office to make a request to TI PDS for such ref design with design specs. So please clarify what exact help you want TI to provide. Again, we need to know your need in detail or your problem to resolve, in order to help to work out a solution for you.