Hi Colleagues,
My customer whats to use the LM5143-Q1 for charging application. is it possible to adjust the current limit and how?
best regards,
Florian
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Colleagues,
My customer whats to use the LM5143-Q1 for charging application. is it possible to adjust the current limit and how?
best regards,
Florian
Florian,
Yes, you can change the current limit by changing the current shunt resistor. See datasheet section 8.3.14.1.
If you'd like to change the current limit on the fly without a new resistor then you will need additional circuitry to adjust the CS input to suite your needs.
-Sam