BQ34110: Facing issue in calibration features like reading cycle count , soc and many more parameter

Hi Rahul,

Can you describe the specific issues you are facing? If you are having trouble with calibration, there are a couple of videos that might be helpful. They are for a different device, but the procedures are the same:

https://training.ti.com/bq34z100-g1-voltage-calibration

https://training.ti.com/bq34z100-g1-current-calibration

The other items you mentioned like cycle count, soc, etc. are described in the Technical Reference Manual for this device: http://www.ti.com/lit/ug/sluubf7a/sluubf7a.pdf Let me know if there is something specific you are having trouble with. I am also attaching a spreadsheet that I recently created to help understand each of the dataflash parameters. This should help give you some default values and to understand how the different parameters are used. /cfs-file/__key/communityserver-discussions-components-files/196/3175.bq34110_5F00_dataflash_5F00_notes_5F00_rev03_5F00_20181002.xlsx

One other document that you might find helpful if you are not sure how to set up a CEDV gas gauge is here: http://www.ti.com/lit/an/slua924/slua924.pdf Go to the Gas Gauging section, but you can ignore the first part about ChemID (does not apply for the BQ34110).

Best regards,

Matt