WEBENCH® Tools/LMR33630: LMR33630

Kevin Lowderman

Intellectual 870 points

Part Number: LMR33630

Tool/software: WEBENCH® Design Tools

When I try to simulate Webench tells me it cannot create a design for this device.

Also, Webench will not even start with firefox. Is windows explorer the only browser supported?

Regards,

Kevin

over 7 years ago

0 Samuel Jaffe over 7 years ago

TI__Mastermind 25590 points

Kevin,

Chrome and Internet Explorer work for me.

What specs are you trying to design for?

-Sam

0 Kevin Lowderman over 7 years ago in reply to Samuel Jaffe

TI__Intellectual 870 points

Are you saying webench design for LM33630 works for you?

Vin is 24V, Iout 3A, I've four designs for Vouts' of 1.21, 1.8, 3.3 and 12V. I'm using the default temp.

-Kevin

0 Samuel Jaffe over 7 years ago in reply to Kevin Lowderman

TI__Mastermind 25590 points

Kevin,

I was able to create all 4 of your designs in WEBENCH using Chrome with no issue. Please send screenshots of the specs you enter and the error message you get.

Thanks,
-Sam

0 kai klaas69 over 7 years ago

Guru 140200 points

Hi Kevin,

start webbench. Then click onto the dark lower half of screen. After that click onto the control box to allow "Adobe Flash" in Firefox.

Kai

Power management

Power management forum

WEBENCH® Tools/LMR33630: LMR33630