600W Power Supply for AVR Amplifiers

Sang C. Lee

Prodigy 10 points

Hi. all

I'm interest 600W Power Supply for AVR Amplifiers.

I can not fine Gerber file.

SLOU293 page19 say available download.

Plz send me the Gerber file

Best regards.

over 14 years ago

0 Hur Koser over 13 years ago

Prodigy 30 points

Hi Sang,

Did you end up getting the Gerber files for the 600W power supply? If so, where can I find them?

Thanks for your help.

0 Mike O' over 13 years ago in reply to Hur Koser

TI__Guru* 85696 points

We are in the process of updating the 600W AVR design it had a few small issues that have been corrected. It will be another month until the gerber files are ready.

0 antonello cotroneo over 12 years ago in reply to Mike O'

Prodigy 20 points

Hello,

I'm interested to 600W project and I've asked in my company to order the evaluation board. Now I'm starting with the desing of my board and I haven't find information about PFC inductor (L3, L4), input inductor (L5, L6) and transformer (TR1, TR2, TR3). I have contacted Ole Wolff to order the components but he doesn't send data-sheet without an order. Can you send me all the datasheet just only for mechanical drawing of the PCB or, better, can you send me the gerber files of the board?

Thank you

Antonello

0 Mike O' over 12 years ago in reply to antonello cotroneo

TI__Guru* 85696 points

This reference design was designed by an outside design house called Upcon. I have attached the magnetic data sheets for your reference in a zip file.

Regards

OWTR-TX13-7.9-6 (T2)[1].zip

0 Jozsef Fekete over 11 years ago

Prodigy 10 points

Greetings!
I ask that the 600W power supply gerber file to be downloaded.

thanks

Jozsef

Power management

Power management forum

600W Power Supply for AVR Amplifiers