• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 178 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LED Driver

Satoshi Yoshida
Prodigy 660 points
Other Parts Discussed in Thread: TPS92515, TPS92513

Hello LED Driver team,

Could you let me know your recommended product?
- Performances and functions are equivalent to RCD-24-0.7(RECOM)
- Analog and PWM dimming method / wider range and higher resolution are preferable.
- Small current ripple
- Single ch
- Vf: up to 22V
- Need to be read status of fault detection(OVP, LED_short/open...) via register, or flags output.
- Higher efficiency, lower EMI

Best regards,
Satoshi

  • 0
    TI__Expert 3920 points

    Dear Yoshida-san,

    Seems to me it's a buck LED driver module.

    Please consider either TPS92513 or TPS92515 for the driver IC.

    You still need external passives such as inductors, diodes, resistors and capacitors to complete the whole module).

    Thank you!