CSD17381F4: The .bxl file may contains a bug, the generated package file loses two pads.

wallace liu

Part Number: CSD17381F4

The CAD file (https://webench.ti.com/cad/dlbxl.cgi/TI_BXL/CSD17381F4_YJC_3.bxl) may have an issue. The derived *.dra file loses 2 pads and encounters a warning "Pad size is zero." May it be fixed?

over 6 years ago

0 John Wallace1 over 6 years ago

TI__Mastermind 38090 points

Hello Wallace Liu,
Thanks for the question. Can you please post the .dra file so we can review it? I checked the .bxl file and it looks OK with all 3 pads.

0 wallace liu over 6 years ago in reply to John Wallace1

Intellectual 280 points

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/YJC0003A.7z

0 John Wallace1 over 6 years ago in reply to wallace liu

TI__Mastermind 38090 points

Hello Wallace Liu,
Can you tell me what version of Allegro you are using?

0 John Wallace1 over 6 years ago in reply to John Wallace1

TI__Mastermind 38090 points

Hello Wallace Liu,

Our CAD engineer created the attached OrCAD .dra file. The Pastemask_Top layer is not getting exported properly for this part(below 2 pads are not getting exported). Please take a look and see if this will work for you.

YJC0003A_OrCAD.zip