TINA/Spice/TPS3106: TPS3106K33DBVR

Ahmet Mali

Prodigy 85 points

Part Number: TPS3106
Other Parts Discussed in Thread: TINA-TI, , TPS3808

Tool/software: TINA-TI or Spice Models

Hi everyone

I need uncrypted spice model of TPS3106K33DBVR for my custom design

Regards

Ahmet

over 6 years ago

0 Marcoo Z over 6 years ago

TI__Mastermind 19580 points

Hi Ahmet,

We do not have any spice model for this device.

-Marcoo

0 Ahmet Mali over 6 years ago in reply to Marcoo Z

Prodigy 85 points

any other spice model same as TPS3106K33DBVR ?

0 Marcoo Z over 6 years ago in reply to Ahmet Mali

TI__Mastermind 19580 points

Hi Ahmet,

What are your reasons for choosing the TPS3106?

0 Ahmet Mali over 6 years ago in reply to Marcoo Z

Prodigy 85 points

I use this component for zynq ps por b reset . Some xilinx papers give this component for reset supervisory circuit . Can you have better solution for PS_POR_B Supervisor Circuit for ZYNQ xc7z035-1ffg900i

AR65240_-_Example_PS_POR_B_Supervisor_Circuit.pdf

0 Marcoo Z over 6 years ago in reply to Ahmet Mali

TI__Mastermind 19580 points

Hi Ahmet,

You will have to use a combination of 2 TPS3808 with each set for each individual voltage threshold. With the CT pin, you can get very close to the same Td of the TPS3106. It is not a hardware solution but it can have the same functionality in SPICE.
www.ti.com/.../toolssoftware

-Marcoo

0 Ahmet Mali over 6 years ago in reply to Marcoo Z

Prodigy 85 points

Thanks marco

Can you provide uncrypted spice model of TPS3808 because ı could not add pspice model into the ltspice

Regards

Ahmet Mali

0 Herman Theodorus over 6 years ago in reply to Ahmet Mali

TI__Genius 9775 points

Hi Ahmet,

For TPS3808, you can request through TI Support: www.ti.com/.../calltisupport.tsp

Scroll down toward the bottom of the page and you can submit a request through email

Herman

Power management

Power management forum

TINA/Spice/TPS3106: TPS3106K33DBVR