• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 198 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2384: about settings for multiple output

ACGUY
Guru 11170 points
Part Number: TPS2384


Hello E2E,

Our customer was build-up the testing board used TPS2384.
When output power over neer 16-W on >2-ports, TPS2384 is stop.
Output power is less than 15-W per port.
Rbias is 124k-ohm.
If TI knows simirer case, please let let me know about detail.

Regards,
ACGUY

  • 0
    TI__Genius 15685 points

    Hi ACGUY,

    This is expected as TPS2384 is a type 1 PSE which only supports type 1 power. The port over current is 375mA(typ) and 350(min). Depending on the port voltage, you will get limit port power limit. Thanks.

    Best regards,

    Penny