• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 282 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5022: How to calculate parts for SEPIC topology

Tadeusz Tatery
Intellectual 310 points
Part Number: LM5022

Hello,

Datasheet of LM5022 does not mention anything on how to calculate parts for SEPIC topology. There is a design procedure for selecting all the components for the boost converter and nothing for SEPIC. Where can I find design procedure for SEPIC?

Regards,

Tadeusz

  • 0
    TI__Mastermind 21720 points
    Hi Tadeusz,

    Thanks for reaching out with your questions.

    There is not a guide specifically for the LM5022 to be designed as a SEPIC. However the guide below covers the general design procedure for a SEPIC
    www.ti.com/lit/an/snva168e/snva168e.pdf

    This can be applied to the LM5022.

    Please let me know if you have any questions.

    Thanks,

    Garrett