• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 333 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS1HA08-Q1: Landing pattern for the TSSOP package

Olrik Maier
Expert 5020 points
Part Number: TPS1HA08-Q1

Hi,

do we have exact landing pattern for the TPS1HA08-Q1 TSSOP package.

Under the following link you get only a pdf with a package drawing but we need the landing pattern.

http://www.ti.com/product/TPS1HA08-Q1/pinout-quality#cadsymfoot

Many Thanks

Best wishes,

Olrik

 

  • 0
    TI__Genius 12410 points
    Hello,
    currently I cannot fing the exact landing pattern for the 16 pin PWP package. However while I look for it you can use
    www.ti.com/.../slma002h.pdf
    On page 5 figure 5 there is a landing pattern for the 24pin PWP package which is the exact same as the 16 pin package but longer. If you line up the 16pin part on pin one of the 14 pin footprint it will fit perfectly and then you can take off the 4 other pins that extend below the part.

    I will continue to look for the landing pattern drawing.