• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 64 subscribers
  • Views 390 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Current calibration with BQ20z95

BQ20Z95: Bq20z95 Charge and Discharge FETs not turning ON

Pieter Louw97
Prodigy 30 points

Part Number: BQ20Z95

The FETS does not turn on in discharge and charge .

There are no permanent failures.

I can turn the fets on in calibration ( command 46 ) but they turn OFF again after reset (command 0041)

I have  Max error at 144%

Any idea?