LM5165: Schematic Check

Brian Antheunisse

Expert 5305 points

Part Number: LM5165

Hi guys,

Can someone take a quick look at my customers lm5165 schematic to make sure there are no glaring mistakes?

Thanks!

Brian

over 6 years ago

0 Katelyn Wiggenhorn over 6 years ago

TI__Genius 11040 points

Hi Brian,

The LM5165 has an excel calculator in the product folder which can be used for a quick check for component selection.

I can do a review of the schematic as well. Would you be able to help answer a couple of clarifying questions first? What is your typical VIN and load current? Also, what is the value of the ILIM resistance?

Thank you,
Katelyn

0 Katelyn Wiggenhorn over 6 years ago in reply to Katelyn Wiggenhorn

TI__Genius 11040 points

Hi Brian,

Would you be able to answer a couple of clarifying questions?

What is your typical VIN and load current? Also, what is the value of the ILIM resistance?

Thank you,
Katelyn

0 Katelyn Wiggenhorn over 6 years ago in reply to Katelyn Wiggenhorn

TI__Genius 11040 points

Hi Brian,

Due to inactivity, I am going to close this e2e thread. If your questions remain, please respond to this thread, and the thread will be reopened.

Best Regards,
Katelyn

Power management

Power management forum

LM5165: Schematic Check