• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 280 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27426: Load mode

Shunsuke Nagata
Genius 13100 points
Part Number: BQ27426

Hi, team,

I would like to know the differences between "constant current model (Load mode=0)" and "constant power model (Load mode=1)".

Q1. Is there some advantage and disadvantage for Load mode 0 and Load mode 1?

Q2. Is there reason why default value the Load mode 1?

Regards,
Nagata.

  • 0
    TI__Guru* 76230 points
    Hi Nagata
    -There is no advantage or disadvantage of one over the other. You just need to set it based on the nature of your load. if your load is neither constant current or power, use constant current mode
    -default is 1 because most user cases are constant power


    the load mode determines the current that is used in rem cap simulations.

    thanks
    Onyx