This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62743: TPS62743 power select different from the EVM.

Part Number: TPS62743
Other Parts Discussed in Thread: TPS62746, TPS62748, TPS62770, TPS62808


Interested in 1.8V for a low power battery design but I'm a bit confused.

If I look at the datasheet for the TPS62743 and examine table 1 I see that I can select 1.8V by setting the pins to Vsel (2, 1, 0) = (0 1 0).

But if I look at the documentation for the associated EVM I get a different answer. According to section 2.1 if I select Vsel(2, 1, 0) to (0 1 0) I'll get out 2.8V.

I'm assuming this is a typo but I'd like to clear it up before I buy the EVM.