BQ27320: Cycle Count skips 0 to 6

K.Yaita

Part Number: BQ27320

Hi Team,

My customer is evaluating BQ27320 and found "Cycle Count" skips 0 to 6 when they set "Cycle Count Percentage"=13[%].
Is it possible case for BQ27320?
I have thought "Cycle Count" is updated every one count, so would like to confirm it.

Best Regards,
Yaita

over 6 years ago

0 Onyx Ahiakwo over 6 years ago

TI__Guru* 76230 points

hi Yaita

I believe cycle count increments once you exceed the values set which is a percentage of design capacity or FCC based on the CCT flag. So setting it to 13 % would mean a full charge or discharge would give multile increment of cycle count.

thanks
Onyx

0 K.Yaita over 6 years ago in reply to Onyx Ahiakwo

Guru 29720 points

Hi Onyx-san,

Thank you always for your support!
Let me confirm log file the issue occured from my customer.

Best Regards,
Yaita

Power management

Power management forum

BQ27320: Cycle Count skips 0 to 6