LM5160-Q1: Pspice model application

Jeno Csizmazia

Part Number: LM5160-Q1
Other Parts Discussed in Thread: LM25017

I have to simulate in Orcad Capture an smps - but the model do not working () I tried with both normal and unencrypted Pspice model ( .lib file of unencrypted inserted into normal model and used it with the normal spice other parts .opj : olb; dsn etc. The SW dont find the template of controller and abort the simulation.
How can I composed the spice models?

over 6 years ago

0 Arief Hernadi over 6 years ago

TI__Mastermind 23845 points

Hi,

i would forward this information to our modeling group

Thanks
-Arief

0 Arpan Gupta over 6 years ago

TI__Expert 3140 points

Hi Jeno,

I have simulated the released project present in TI website. Below is the simulation result.

Simulation result:

Kindly ensure that you are using licensed PSpice version 15.7 or above.

Thanks & Regards,

Arpan Gupta

0 Jeno Csizmazia over 6 years ago in reply to Arpan Gupta

Prodigy 70 points

Hi Arpan,

Thanks for your support - but I download the big size model (92kB) ad configured it in 17.2 Capture . ( With the same configuration the LM25017 model is working.

Do you have suggestion to solve the problem?

Thanks: Jeno

0 Arpan Gupta over 6 years ago in reply to Jeno Csizmazia

TI__Expert 3140 points

Hi Jeno,

Are you using licensed version of PSpice 17.2?

Thanks & Regards,
Arpan Gupta

0 Jeno Csizmazia over 6 years ago in reply to Arpan Gupta

Prodigy 70 points

Hi Arpan,

Yes - I am using the Cedence\SPB-17.2

Thanks : Jeno

0 Arpan Gupta over 6 years ago in reply to Jeno Csizmazia

TI__Expert 3140 points

Hi Jeno,

Are you using trial version or licensed version of PSpice 17.2?

Thanks & Regards,
Arpan Gupta

0 Jeno Csizmazia over 6 years ago in reply to Arpan Gupta

Prodigy 70 points

Hi Arpan,
I am using the 17.2-2016-P010 SW version with licence- at simulation setting all times checks the license!
Thanks: Jeno

0 Jeno Csizmazia over 6 years ago in reply to Jeno Csizmazia

Prodigy 70 points

Downloaded and applied LM25017 with the same configuration - it is working!

0 Arpan Gupta over 6 years ago in reply to Jeno Csizmazia

TI__Expert 3140 points

Hi Jeno,

Could you please attach your project here (one that is not running)? I will check in my system and get beck to you.

Thanks & Regards,
Arpan Gupta