• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 352 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS92513HV: figure 5 characterization data needed

Vincenzo Pizzolante
Mastermind 26186 points

Part Number: TPS92513HV

hi,

I'm looking for the spread data of the curve in figure 5 of the TPS92513HV datasheet.

do we have upper and lower limits (at least for the factors related to the IC)?

thanks a lot in advance

KR

Vincenzo

  • 0
    TI__Expert 3950 points
    Hi Vincenzo,

    Please refer to the electrical characteristic table -- Analog current adjust (VIADJ, VISENSE).
    That shows you the spread on the ISENSE pin voltage with different VIADJ input.

    Thanks!
  • 0 in reply to Issac Hsu
    TI__Mastermind 26186 points
    hi Isaas,

    thanks for the prompt reply...

    yep, that was also my 1st though, as

    ILED = Visense / Risense
    and
    Visense = Vadj / 6

    I know the spread of Vadj and Risense but not of the "6", i.e. the missing part is the spread of the Vadj/6 (that's the typ. only).

    it is enough an high level indication like for example <X% or something like that...

    thanks a lot in advance
    KR
    Vincenzo
  • 0 in reply to Vincenzo Pizzolante
    TI__Expert 3950 points
    Hi Vincenzo,

    "6" is typ, but the min max values has included the variation of this "6" in.
    For instance, VIADJ = 0.18V, you get typ at 30 mV at VISENSE.
    However, we guarantee it will be 21.4 mV min and 40 mV max (including the variation of the "6").

    Thanks!