BQ34Z100-G1: bq34z100-g1

Dalip Singh

Intellectual 380 points

Part Number: BQ34Z100-G1

After submitting roomtemp.csv and lowtemp.csv, the GPC tool reports the following error:

low temperature file has no rest after discharge current for OCVpoint is -0.005.

I have attached my lowtemp.csv file.lowtemp.zip

over 6 years ago

0 Bryan Kahler over 6 years ago

TI__Mastermind 25955 points

Hi Dalip,

There is an error in the data where the voltage jumps up to over 60,000 mV.

Please remove this section.

Sincerely,
Bryan Kahler

0 Dalip Singh over 6 years ago in reply to Bryan Kahler

Intellectual 380 points

Hello Bryan,

I have removed that section and re-submitted the data.

I am still getting the same error: low temperature file has no rest after discharge current for OCVpoint is -0.005

I am attaching the zip file of my data submission. Please review and advise.

low temp no rest.zip

0 Bryan Kahler over 6 years ago in reply to Dalip Singh

TI__Mastermind 25955 points

Hi Dalip,

Unfortunately, due to current loading, I will be unable to update the post today. Please expect an update by EOD Wednesday.

Sincerely,
Bryan Kahler

0 Bryan Kahler over 6 years ago in reply to Bryan Kahler

TI__Mastermind 25955 points

Hi Dalip,

Allow the battery to fully soak at the cold temperature prior to beginning the log.

Try trimming the log and resubmitting.

Sincerely,
Bryan Kahler

Power management

Power management forum

BQ34Z100-G1: bq34z100-g1