BQ27441-G1: Unable to read Data Memory first byte(QmaxCell0)

Hi All,

We are using bg27441.

When tried to read the data memory SubClass ID 52H (State), getting other values ok except 0th location QmaxCell0[0].

QmaxCell 0 first byte(location 0) will always be 0x00. Next byte onward read values seams to be ok. Not sure but, I think this is same for every Subclass ID read.   

I cross checked writing values to fuel gauge seems to be ok.

Appreciate your feedback.

Regards,

Zahir