• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 1512 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24195: BQ24195 SCH review

Nic Lin
Intellectual 2020 points
Part Number: BQ24195

Team,

Do you have any concern of below BQ24195 SCH? Input is USB 5V.

  • 0
    TI__Guru 50811 points
    Hi,

    1. D+/D-: Referring to p14 of the d/s, if D+/D- are floating, the input current limit will be set to 100mA. Please short them together if D+/D- input current limit detection is not needed.
    2. TS: If thermistor is not used, please set the TS pin voltage within normal voltage range by adjusting the TS pin resistors R72, R73 and R74.
    3. Please double-check your schematic referring to the BQ24195 EVM schematic.

    Thanks,

    Ning.
    Please click "This Resolved my issue" button if this post answer your question.