How to configure tiva-c pins to pull out 5V.

balauroiu radu

Intellectual 260 points

Hello ,

I want to configure 1 pin o tiva-c launchpad to pull out 5V instead of 3.3V . Any ideea how to do that ?

over 6 years ago

0 Bob Crosby over 6 years ago

TI__Guru 72500 points

If you need to output a 5V signal from a TM4C device you need to use a level shifter. One can design a level shifter from discrete parts (just do a google search) or use a level shifter IC. See: www.ti.com/.../overview.html

Power management

Power management forum

How to configure tiva-c pins to pull out 5V.