BQ24617: How to set up maximum charging current at 1.5A ?要設定充電電流為最大1.5A我需要修改那些阻值。

HI Bogey,
To set max charge current, you have to modify the resistor divider network to control the voltage on ISET1. For calculation of actual values you can use the excel tool BQ246xx Calculation Tool Rev 1.5; found here: www.ti.com/.../toolssoftware
For the rest of the schematic, you will need more than 10uF Output capacitance to stay within recommended LC resonant frequency range (can calculate in tool). Choose snubber resistor package based on estimated power dissipation. Why does customer have diode D1 in schematic?
Everything else looks good.

Hi Sir
D1 is from Figure 20. Input Filter, may we check if it will affect any current or voltage set up?
Bogey

Hi Sir
Customer already layout diode in their board. is it will impact function?
or just let it empty.
Bogey