• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 376 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Looking for Vin 5V LDO with ultra low dropout 0.2V for 600mA

Manimaran Kanesan
Intellectual 460 points
Other Parts Discussed in Thread: TLV759P

Dear TI,

I am looking to power my device from 5V / 1A, I need a LDO Vin = 5V and Vout = >4.75V at >600A, Vdropout need to>0.25V.

Any recommendation, I know some Ti part able to do these voltages and current, I been through a lot of datasheet but I cannot find the info I need at 5V. 

Thank you. 

  • 0
    TI__Expert 4320 points

    Hi Manimaran,

    Thank you for submitting this request.

    I'd like to recommend our new TLV759P device. This device comes in a 2mm x 2mm WSON package and can support up to 1A load current. If you look at the dropout voltage table within the datasheet you can see it has a max dropout of 225mV for your output voltage.

    Regards,

    Wilson