• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 310 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR23610: Can LMR23610 support the FLY-buck applicant

Eric Lai
Expert 4940 points
Part Number: LMR23610
Other Parts Discussed in Thread: LM5161

Hi Expert,

We would like to propose the LMR23610 for FLY-buck of isolated applicant.

Pls advice whether LMR23610 can support this FLY-buck design or not.

Thanks.

 

Best regards,

Eric Lai

 

Field Application Engineer

Texas Instruments Taiwan Limited

O: +886-2-2175-2582

M: +886-909-262-582

E-Mail:Eric.Lai@ti.com 

  • 0
    TI__Mastermind 40040 points
    Hello Eric,

    It is possible to configure as a FlyBuck, but the current limit is not suitable for short circuit in the secondary. If you decide to use, care should be taken for fault conditions to ensure design is robust. Can consider the LM5161 as a good alternative for FlyBuck application?

    Hope this helps?