Hi,
I am the FAE of a distributor dealing with TI products.
The customer has asked me the following questions about TPS22916C.
When VON is in the "H" state, if VON falls momentarily, I would like to know whether VOUT is turned off.
As shown in the figure below, when VON falls below VIL, VOUT turns off after TOFF.
Is it correct that I think that VOUT will not turn off if VON drops below VIL and is higher than VIH in a shorter time than TOFF?
Please let us know about TPS22916CL.
When the ON pin is open, the pull down works and the device turns on.
Is it recommended to use the ON pin open?
The customer has asked me the following questions about TPS22916C.
When VON is in the "H" state, if VON falls momentarily, I would like to know whether VOUT is turned off.
As shown in the figure below, when VON falls below VIL, VOUT turns off after TOFF.
Is it correct that I think that VOUT will not turn off if VON drops below VIL and is higher than VIH in a shorter time than TOFF?
Please let us know about TPS22916CL.
When the ON pin is open, the pull down works and the device turns on.
Is it recommended to use the ON pin open?
Best regards,
