Hi team,
In LMR14030-Q1 datasheet, the shutdown current is specificed at EN=Low as below.
Does the shutdown current (1~3uA) include the EN PIN (internal pull-up) current (1uA)?
Thanks,
Sam Lee
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
In LMR14030-Q1 datasheet, the shutdown current is specificed at EN=Low as below.
Does the shutdown current (1~3uA) include the EN PIN (internal pull-up) current (1uA)?
Thanks,
Sam Lee