• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC2897A: Inquire about configuration of unused pins

Charles Jeon
Expert 2975 points
Part Number: UCC2897A

Hi team

How do I handle unused pins in UCC2897A?

Thank you.

  • 0
    TI__Mastermind 34465 points
    Hello Charles,
    Pins 2 and 20 on the TSSOP package and pins 19 and 17 on the VQFN package are labelled N/C.
    These pins should not be connected or used ion the pcb.
    There is a SYNC pin that is sometimes not used and this should be left floating.
    Every other pin is connected to its appropriate trace on the pcb.
    Regards
    John