This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD90160A: V33A to V33D

Part Number: UCD90160A

hi 

the datasheet recommended 4.99ohm between v33a and v33d

"Connect V33A (pin 46) to V33D through a 4.99-Ω resistor"

but on the evb design there is a "BLM21pg221sn" instead 4.99ohm 

what to put between These two?