TPS61178: land pattern issue

Jeff Yang76

Intellectual 490 points

Part Number: TPS61178

Hi,

We would like to know TPS61178 pin 6,7,8 should create land pattern as green line or black line?

And pin1~5, pin9~13 R(0.05), can create by right angle?

Thanks!

Jeff

over 6 years ago

0 Jasper Li over 6 years ago

TI__Mastermind 46905 points

Hi Jeff,
the green line is the SOLDER MASK OPENING, the black dot line is the METAL UNDER SOLDER MASK. the explanation can be found the bottom of the same page of the datasheet.
what is your meaning of "right angle"

0 Jeff Yang76 over 6 years ago in reply to Jasper Li

Intellectual 490 points

Hi Jasper,

90 degrees angle.

Thanks!
Jeff

0 Jasper Li over 6 years ago in reply to Jeff Yang76

TI__Mastermind 46905 points

Hi Jeff,
I think it is Ok to use the right angle.

Power management

Power management forum

TPS61178: land pattern issue