• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 349 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2595: OVLO and OVC

David Park
Expert 6680 points
Part Number: TPS2595

Hi,

I'm checking the feature of TPS259533.

In the table of datasheet, TPS259533 OVC is 5.7 typ and EN is active low.

I think it can support output overvoltage clamp at 5.7V and OVLO with dividing resistor at EN.

Could you let me know that my understand is correct?

Thanks.

  • 0
    TI__Guru 57737 points
    Hi David,

    TPS259533 has a 5.7V fixed Clamp as well as adjustable OVLO setting. Whichever protection hits first will act.
    So, if you want to use OVLO feature, you need to set it's threshold below 5.7V.

    Hope this helps!