• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 231 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25895: when the battery power running low, No recovery charging

Leo He
Intellectual 420 points
Part Number: BQ25895

BQ25895   Charge the battery to 100%,than  the battery discharge and it is low power , the BQ25895 did not recharge the battery.

how  should i control it ?any tool should i use ?

  • 0
    TI__Guru**** 165986 points
    Hi Leo,

    The BQ25895 automatically enters OTG mode when VBUS is removed if OTG pin is high. Is that what is discharging the battery? If you plug in power supply to VBUS, the charger should start charging, even with OTG pin high.

    Regards,
    Jeff