• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 316 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65580: Multi-layer power inductors for TPS65580 Synchronous Step-Down Converter

Mark Potts
Prodigy 30 points
Part Number: TPS65580
Other Parts Discussed in Thread: TPS65262

I would like to use the TPS65580 Synchronous Step-Down Converter in a triple output power supply design. Total output current (around 500ma) is quite a lot lower than the device capabilities. I would like to use smaller and cheaper multi-layer power inductors rather than wire-wound. Can anyone recommend suitable components. I would also be interested in any other recommendations for suitable triple output power converter ICs.

Thanks,
Mark