UCC28950: 3D model file consult

Lin_Charles

Part Number: UCC28950

Hi team, I cannot find STEP model of UCC28950. My customer need this data, can you please help share me this file? Thank you for your help here.

over 6 years ago

0 Colin Gillmor over 6 years ago

TI__Mastermind 25570 points

Hi Charles

I couldn't find the model either - I've asked some colleagues for further information and I'll post it here when I get it.

Regards

Colin

0 Lin_Charles over 6 years ago in reply to Colin Gillmor

TI__Expert 4260 points

Hi Colin,

Any updates about this file?

0 Lin_Charles over 6 years ago in reply to Lin_Charles

TI__Expert 4260 points

Hi Colin,

Do we have updates about this 3D model file? Thanks.

0 Colin Gillmor over 6 years ago in reply to Lin_Charles

TI__Mastermind 25570 points

Hello Lin

My apologies for the delay in responding. I got a response that the packaging team in TI will sometimes develop this type of symbol & footprint for TI ICs but usually only for new devices (not legacy/older devices).
Since this is a fairly common package, the customer may be able to use an existing model.

PINS 24
PACKAGE PW
PACKAGE_GROUP TSSOP

I know this is not exactly the answer you were hoping for but you may be able to use an existing model.

It should also be possible to find a 24 pin TSSOP STEP model online.

Regards
Colin

0 Lin_Charles over 6 years ago in reply to Colin Gillmor

TI__Expert 4260 points

I understand what you said. I think it would be helpful if we can upload this file to UCC28950 product folder. Thanks.

0 Colin Gillmor over 6 years ago in reply to Lin_Charles

TI__Mastermind 25570 points

HI Charles

I'm going to see if it's possible but it may take some time. In the meanwhile I'm going to close this thread. If the model is going to be developed then it will be put onto the product page.

Regards
Colin

Power management

Power management forum

UCC28950: 3D model file consult