BQ20Z45-R1

co nguyen

Other Parts Discussed in Thread: BQEVSW, BQ20Z45-R1, EV2400

I am working on project using BQ20z45-R1, and I am using EV2400. I get an issue using bqEVSW (v0.09.88) to support target. Please see screenshot. Do you have any software bqEVSW which suitable with BQ20z45-R1 and EV2400?

Thanks

over 6 years ago

0 Batt over 6 years ago

TI__Mastermind 42535 points

Hi,

Are you sure you attached it to the smbus port and not the i2c port? It should work.

0 co nguyen over 6 years ago in reply to Batt

Prodigy 60 points

yes, I attach it to SMB port.

Thanks

0 Batt over 6 years ago in reply to co nguyen

TI__Mastermind 42535 points

You can manually try to open the bqevsw for your appropriate gauge. It was just tested here and the gauge works with an ev2400.

Power management

Power management forum

BQ20Z45-R1