LMZ22010: LMZ22010 SYNC grounding PWM Fixed stray

Hi,

Is there a specific question that you have regarding the LMZ22010 power module?

In the mean time, listed below are my comments of the schematic review:

• Minimum recommended input capacitance of 30uF (√)
• Recommended output capacitor combination of 2 x 330uF with a 47uF (√)
• AGND externally connected to PGND(EP) (√)
• Regulated output voltage
  • VOUT = 0.795 x ( 1 + 15.4k/2.37k) = ~6V
• Enable divider
  • Vin_uvlo = ((42.2k/12.7k)+1)*1.274 = 5.5V (follows typical application in datasheet)

Regards,

Jimmy