CCS/BQ35100: Can you provide the reference program of BQ35100?

boer.deng

Part Number: BQ35100
Other Parts Discussed in Thread: MSP430FR2433,

Tool/software: Code Composer Studio

I am currently working on the electrical energy metering module of disposable lithium battery using BQ35100+MSP430FR2433. Nebula has some registers that I don't understand in the manual, could you please provide reference code for me to learn?

over 5 years ago

0 Tomasz Kocon over 5 years ago

Guru 26200 points

https://github.com/Douglas-Particle/BQ35100

0 boer.deng over 5 years ago in reply to Tomasz Kocon

Expert 1085 points

Is there any css-based code?

0 Tomasz Kocon over 5 years ago in reply to boer.deng

Guru 26200 points

I do not know.
Try google

0 boer.deng over 5 years ago in reply to Tomasz Kocon

Expert 1085 points

At present, all internal registers are read and write normally, but the chip is not measured. May I ask how to operate the initial measurement and how to operate the battery re-measurement?

0 Kang Kang over 5 years ago in reply to boer.deng

TI__Mastermind 24870 points

Hello Boer,

What mode do you plan to use the bq35100 on?

1. If it is EOS: please follow Section 5.3.1 in the TRM for the bq35100

2. If it is SOH mode: Please follow Section 5.2 in the TRM.

3. If it is ACC mode: Please follow Section 5.1 in the TRM.

http://www.ti.com/lit/ug/sluubh1c/sluubh1c.pdf

This is the reference manual for the device.

Thanks

Power management

Power management forum

CCS/BQ35100: Can you provide the reference program of BQ35100?