This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5143-Q1: gate drivers during enable off

Part Number: LM5143-Q1

Hi there,

I have a crowbar across the output to shorten them. To check the crowbar status I plan to add a small voltage into the output caps, measure the voltage and shorten them and measure the voltage.

I have checked the manual but did not find information according gate driver position (H/L) during Enable=OFF. May be its hidden in the text....

Could you give me a tip according this, thanks.

Frank