• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 528 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Design Review of bq76930 and bq78350 Battery Management PCB

BQ76930: Design Review of bq76930, bq78350 & BQ76200 Battery Management PCB

Phil Reid
Prodigy 210 points
Part Number: BQ76930
Other Parts Discussed in Thread: BQ78350, BQ76200,

G'day Texas Instruments,

We are designing a Li-ION battery management PCB for use in a downhole data acquisition system based on the bq76930, bq78350 & BQ76200.

Physical size of the pack is the major channel with the maximum outer diameter of the battery enclosure limited to 25mm.

Battery is an 8S1P. operating current typically < 1A

It would be appreciated if an engineer from TI could review our schematic / pcb design before we proceed to production to identify any issues or hazards with our deign.

If possible, please let me know where I can send the design files (and what format is required).

Thanks

Phil

  • 0
    TI__Guru 54715 points

    Hi Phil,

    I can look at your design for common IC implementation issues, but for hazards or review specific to your industry you may need a consultant familiar with your industry or compliance requirements.  I will send you a message separately by the e2e "friend" system.